Construction Cold Extrusion Rebar Coupler 700MPa Steel Coupler Joint

Quick connect coupler for cold extrusion construction

working principle :

The steel bar can be connected with the lateral extrusion through a cold extruder, so that the connector undergoes plastic deformation, and then it is tightly occluded with the steel to connect the steel bar.

advantage:

A. Shorten your engineering cycle-two steel bars can be connected within 35 seconds;
B. Obtain the highest quality-100% of the steel bar fracture, without worrying about safety, and can pass any safety quality test;
C. Saving steel bars-abandoning welding and patchwork instead of our connection method can save a lot of steel bar materials.

Why choose us:

1. High tensile strength, the strength reaches level II (equal to the base material);
2. Working range: Φ16mm-Φ40mm
3. Strong connector, stable and reliable; no special requirements for the weldability of steel bars;
4. Each connector only needs to be stamped 1-3 m, which is about ten times faster than ordinary welding;
5. The oil pump has only 1-3 KW power, not limited by power capacity, flexible structure, and can run on multiple machines;
6. No flammable gas, not affected by rain or cold weather;
7. Alleviate the congestion at the connection point and facilitate concrete pouring;
8. No need for professional and experienced workers, able to connect the replacement steel bars of different diameters;
9. Save 80% of connector steel consumption.

700MPa Cold Extrusion Rebar Coupler

Construction Cold Extrusion Rebar Coupler

700MPa steel coupler joint

Construction Cold Extrusion Rebar Coupler 700MPa Steel Coupler Joint Images